Resolving Hisense TV's On-Off Loop with Ease (2024)

Have you ever experienced the frustration of settling in to watch your favorite show only to have your TV turn off unexpectedly, or worse, turn on and off repeatedly? If you own a Hisense TV that is exhibiting this issue, fear not! While it may seem like a nightmare, there are steps you can take to solve the problem and get back to enjoying your binge-worthy content.

Firstly, check the power source and cables. If the power source is unstable or the cables are loose or damaged, it can cause the TV to turn off and on. Make sure the power outlet is functioning correctly and the power cord is firmly plugged in. Additionally, ensure all other cables, including HDMI and audio cables, are securely connected.

If the issue persists, try resetting your TV to its factory settings. This can be done by accessing the settings menu and selecting the option to reset the TV. Be aware that this will erase all of your current settings and preferences, so it’s a good idea to take note of any settings you may want to reconfigure after the reset.

What to do?Why do it?
Perform A Power Cycle On Your Hisense TVBecause energy never stops flowing through the components when you resume with the remote, it has no influence on the hardware.
Restart The Hisense TVRestarting a broken tv is the best and most simple way to fix it.
Check your cablesFaulty or damaged HDMI or power cords may cause the TV to lose signal or shut down at random.

Page Contents

Why Does My Hisense TV Continue To Blink On And Off?

Resolving Hisense TV's On-Off Loop with Ease (1)

Ah, the old blinking TV conundrum. If you’re experiencing this with your Hisense TV, fear not, for you are not alone in this predicament. While it may seem like a mysterious and perplexing issue, there are a few reasons why your TV might be blinking on and off like a strobe light.

One common cause of a blinking Hisense TV is a loose or faulty cable. Double check that all cables are securely plugged in and inspect them for any signs of damage. A loose or damaged cable can cause a temporary loss of signal, resulting in the blinking issue.

Another culprit could be an unstable power source. If the power outlet is not functioning correctly, or if there is a power surge or outage, the TV can experience intermittent blinking. Consider trying a different power outlet or using a surge protector to stabilize the power source.

Lastly, the issue could be with the TV’s firmware or software. Try resetting the TV to its factory settings or updating the firmware to see if that resolves the issue.

Why Does My Hisense TV Keep Restarting?

Fear not, for there may be a simple solution to this frustrating problem. The culprit may be as simple as an outdated software version.

Another potential culprit could be a frayed or damaged power cord. But before you start rummaging through drawers for a replacement, try restarting the device or performing a factory reset. Be warned, this will erase all saved data and return the device to its factory settings, but it may just solve the issue at hand.

Lastly, check the quality of your internet connection. Lagging or malfunctioning devices can often be attributed to internet connectivity issues. If you suspect this may be the case, try resetting your router or contacting your internet service provider for assistance.

Why Does My Roku Hisense TV Keep Turning On And Off?

Resolving Hisense TV's On-Off Loop with Ease (2)

For a variety of reasons, some of which have already been stated, your Roku Hisense TV may be on or off. The most frequent and, fortunately, easiest issues to fix are internal issues that can be fixed with a quick restart and issues with internet access.

Turning your device off, then back on or unplugging it, then plugging it back in are the first steps in resetting it.

Make sure your internet connection is strong because a poor connection will prevent your TV from working properly. If the issue continues, perform a factory reset on the device. In order to determine whether a warranty is applicable or whether a replacement is feasible if the issue persists, get in touch with Hisense TV or the shop that sold you the product.

Also, ensure your internet connection is dependable, secure, and safe before attaching a smart TV like the Hisense. Use caution when downloading apps from websites that are safe and secure and cannot transfer viruses to the TV.

It’s also possible that the TV will act up if an unwanted virus is on it. If you want to save or playback programs, it’s also crucial to have a memory stick installed. Resetting the device involves unplugging and replugging your memory stick.

How To Stop Hisense TV From Turning Off?

If you’re frustrated with your Hisense TV turning off on its own, don’t worry, there are a few things you can try to fix the issue. Here are some potential solutions to get your TV working properly again:

  1. Check your sleep timer settings: Your Hisense TV may have a sleep timer set, which can automatically turn off the TV after a certain period of time. Check your TV’s settings and disable the sleep timer if it’s on.
  2. Disable CEC settings: Consumer Electronics Control (CEC) is a feature that allows you to control multiple devices with one remote. However, it can sometimes cause issues with devices turning off unexpectedly. Try disabling CEC settings in your TV’s settings menu.
  3. Power cycle the TV: Power cycling involves unplugging the TV from the power outlet, waiting for a few minutes, and plugging it back in. This can sometimes reset the TV and fix any issues it may be experiencing.
  4. Update your TV’s software: Check if there is a software update available for your Hisense TV. Updating the software can often fix bugs and glitches that may be causing the TV to turn off.
  5. Check for overheating: If your Hisense TV is overheating, it may be turning off to prevent damage. Make sure the TV has proper ventilation and isn’t placed in a hot or enclosed space.

Hisense TV Driver Problems

When you connect your Hisense Roku TV to a computer or laptop, it may switch off due to a driver issue with your computer.

Update the drivers on your PC to the most recent versions and reconnect the TV after the drivers have been updated.

To update Windows drivers, follow these steps:

  1. On your keyboard, press the Windows key.
  2. Enter Device Manager in the search box.
  3. To open it, select Device manager.
  4. Scroll all the way down to Display and Display adapters.
  5. Both lists should be expanded.
  6. Select Update driver from the context menu after right-clicking on each entry in both lists.
  7. Follow the instructions in the update wizard to locate and install the most recent drivers from the internet.

To install it on Mac, follow this procedure:

  1. On the upper right of the screen, click the Apple logo.
  2. Choose System Preferences.
  3. Then click on Software Update.
  4. Install any updates that are listed here.

Restart The Hisense TV

Restarting a broken TV, regardless of the manufacturer, is one of the simplest ways to fix it.

Any problems with the television may be resolved with a simple restart, which will not take long.

Follow this procedure to restart your Hisense TV:

  1. Point the remote at the TV and press the Power button.
  2. Allow at least 30 seconds before pressing the Power button again.
  3. After restarting the TV, wait a few moments to check whether it switches off again.
Resolving Hisense TV's On-Off Loop with Ease (3)

Perform A Power Cycle On Your Hisense Smart TV

Because energy never stops flowing through the components when you resume with the remote, it has no influence on the hardware.

Most hardware failures may demand a power cycle, which involves turning off and then turning back on all power to the TV.

Follow these procedures to restart your television:

  1. Switch off the television.
  2. Remove the television from the wall socket.
  3. Wait at least 30-45 seconds before reconnecting the TV.
  4. Start the television again.
  5. Check to see if the TV turns on after being turned off.

Check Your Cables

Faulty or damaged HDMI or power cords may cause the TV to lose signal or shut down at random.

Hisense TVs also contain HDMI-CEC, thus if there is a problem with the HDMI cable, it may believe it is being instructed to turn off and do so.

Examine all of your wires for physical damage and clean any debris or dust from the end connectors.

Test the HDMI cable with another monitor to check that it is not the source of the problem.

Because the problem isn’t restricted to the TV, replace any damaged or frayed power or HDMI cables as soon as you notice them. It is also possible that it will start a fire.

I would recommend a Belkin HDMI 2.1 cable and a PWR+ power cord as appropriate replacements for your older cables.

Try Another Power Outlet

Power supply problems might arise not just from the TV, but also from a power socket that cannot give adequate power to the TV.

This causes the television to turn off at random intervals with no warning and has the potential to irreversibly damage your television.

By just plugging the TV into another socket, the likelihood that it is the power outlet is eliminated.

Unless your house isn’t getting enough electricity, if you try another outlet, your TV should stop acting up.

If the situation remains the same and the television continues to turn off, the socket may not be the culprit.

Turn off the energy-saving option on your Hisense TV

The energy-saving mode on the Hisense TV can be harsh at times, and it can turn the TV off at random when it deems it is not being used.

Turn this option off and check whether the TV turns off again.

To disable the capability, perform the following steps:

  1. Start the TV’s menu.
  2. Select the Settings option.
  3. Select Energy Saving.
  4. Adjust the setting to get the highest energy savings without allowing the TV to save too much power.
  5. When you turn off the Energy-saving option, see if the TV turns off.


How can you hook up a universal remote to a Hisense TV?

Answer: First and foremost, you must determine the correct code for your Hisense TV. These remote codes can be used to pair a Hisense Smart TV with any universal remote.

How Can a Hisense TV Be Recharged?

Answer: Reset the Smart TV. To do so, press and hold the ‘EXIT’ button on your remote for at least 15 to 20 seconds. The Hisense TV factory service menu will pop up after 15 seconds. Switch off the TV by pressing ‘OK.’

Are Hisense Roku TVs equipped with buttons?

Answer: TCL and Hisense Roku TVs each come with a slightly modified Roku remote that can control the entire TV. The remote has a mute button, volume controls, and a back button.

How to Turn On a Hisense TV Without the Remote

All Hisense TVs have a physical power button you can use to turn it on without a remote.

The power button is typically located underneath the TV screen, right where the flashing power light should be.


  • Hisense is a terrific brand, and problems like this are more common in older TVs that need to be replaced anyway.
  • Newer Hisense TVs allow you to mirror your iPhone screen and watch nearly anything.
  • With a high-resolution panel and an excellent Google TV platform, this is an excellent time to get a Hisense TV.
  • The information provided above should have you back to watching your favorite shows on your Hisense TV in no time, without interruptions such as random restarts and the TV going off and on.

Other Articles

  • How to Use an iPhone as a Remote Control for a Samsung TV (Remote Alternatives)
  • What Are Honeywell T9 and T10’s Differences?
  • How to Connect AirPods to Samsung TV (Simple Solution)

Click here to view the Visual Story Version of this Article.

Don’t hate – Automate

Resolving Hisense TV's On-Off Loop with Ease (2024)


Resolving Hisense TV's On-Off Loop with Ease? ›

Power Supply Problems

Is the cord securely plugged into the wall? A loose connection can cause your TV to turn off unexpectedly, and so can an aging power supply cord. If you notice frayed wires or damage to your TV's power cord, it's time to shop for a new TV to prevent further issues and potential electrical hazards.

Why does my TV turn off as soon as I turn it on? ›

Power Supply Problems

Is the cord securely plugged into the wall? A loose connection can cause your TV to turn off unexpectedly, and so can an aging power supply cord. If you notice frayed wires or damage to your TV's power cord, it's time to shop for a new TV to prevent further issues and potential electrical hazards.

What to do if your TV turns on and off repeatedly? ›

When the TV turns on or off by itself, you should check the remote controllers to see if the power button or any other buttons are stuck. If some important buttons are stuck, this may interfere with the television. In addition, you should find out all remote controllers in your room and check them.

Why is my TV stuck in a boot loop? ›

Check the power source of your TV and see if there are any loose connections or issues with the outlet or cord. Restart the TV by unplugging it and waiting for a few minutes before plugging it back in. Update the TV's firmware to the latest version to ensure that any bugs or glitches are resolved.

Does Hisense TV have a reset button? ›

Yes, the Hisense TV has a reset button.

The reset button can be found at the back of the unit, depending on the model. You'll be needing a small pin to poke the tiny hole to reset the Hisense TV.

How do I get my TV out of standby mode without a remote? ›

Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.

Why does my TV keep turn off after a few seconds? ›

If your TV is turning off every few seconds, the issue could be with the power button itself. The button may be stuck in the “on” position, causing the TV to cycle on and off. Or the button mechanism may be damaged or faulty, having the same effect.

Why does my TV go off when I turn light on? ›

The momentary shut off of your LCD TV when you operate electrical switches in your home is likely due to electrical interference, also known as electrical noise.

Why does my Sony TV turn off as soon as I turn it on? ›

If the TV is turning off automatically: Check the Daydream or Screen saver settings: Set When to Sleep or Put device to sleep to Never.

Why does my TV turn on then go black? ›

Input source is incorrect: If the input source is set to the wrong option (e.g. HDMI when trying to watch cable TV), the screen may go black. Power issue: If there is a power issue, such as a blown fuse or a malfunctioning power supply, the screen may go black.

Top Articles
Latest Posts
Article information

Author: Reed Wilderman

Last Updated:

Views: 6474

Rating: 4.1 / 5 (72 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Reed Wilderman

Birthday: 1992-06-14

Address: 998 Estell Village, Lake Oscarberg, SD 48713-6877

Phone: +21813267449721

Job: Technology Engineer

Hobby: Swimming, Do it yourself, Beekeeping, Lapidary, Cosplaying, Hiking, Graffiti

Introduction: My name is Reed Wilderman, I am a faithful, bright, lucky, adventurous, lively, rich, vast person who loves writing and wants to share my knowledge and understanding with you.